|
PowerTran Jack Plate JP75PSS Part # 6700
Rated for a maximum 250 hp motor with a maximum motor weight
of 650-lbs, this unit will help you squeeze additional
acceleration, speed and fuel economy out of your rig.
The PowrTran JP75PSS Jack Plate features an advanced sleek design with an extra
heavy duty 6061-T6 extruded marine alloy aluminum frame that
ranges in thickness from ½” to ¾” throughout. A full 7.5"
vertical lift provides exact prop height for any condition.
With the JP75PSS you no longer need to settle for a
compromised transom height, or sacrifice top end speed to
get on plane.
The JP75PSS Jack Plate is powered by a PowrTran Electro-Mechanical
Linear Actuator rather than a hydraulic actuator that
delivers a full 3,500 lbs. of thrust with less than a 25 amp
draw on a 12 volt battery. And, the JP75PSS "stays put"
where you position it. It will not "back down" like
hydraulic powered units.
Our actuators are built and marine sealed to operate for
years in a harsh, wet environment. See our Frequently Asked
questions to learn more about the advantages of an Electro-
Mechanical Actuator vs. a Hydraulic Actuator.
Specifications PowerTran JP75PSS:
Max Horsepower: 250 hp
Max Motor Weight 650 lbs.
Unit Weight: 55 lbs.
Dimensions: 19 ¾”W x 18 ¾”H x 6”D
Vertical Lift: 7.5”
Setback: 6”
Operation: 12 Volt Electro-Mechanical
Actuator Drive: Ball Screw
Construction: 6061-T6 Marine Alloy Extruded Aluminum Frame
Mounting Plate: 1/2" thick
Hardware: Stainless Steel |
